All You Need to Know About The Cyclonic Technology Used in Vacuum Cleaners

7

Vacuum cleaners have become a major part of our lives now. Even when our house looks clean, there might be a lot of minute dust and dirt particles left out that might go unseen. There are different kinds of vacuum cleaners available in the market. Though they perform the same function, their principle of working might be different. One of them is the cyclonic technology. Even the best vacuum cleaner in India uses the cyclonic technology as it can suck even the minute dust particles.

This revolutionary technology was developed by James Dyson during the 1980s. Vacuum cleaners that employ this technology do not have a filter or bag to hold the dust and dirt like any other vacuum cleaner. Airstream is passed through cylinders along a spiral path with high speed. As the dust particles experience a centrifugal force when the air stream shoots them in a spiral path, this causes them to flog away from the air stream; the dust is collected at the bottom of the cylinder after being extracted from the air.

How Are Cyclonic Vacuum Cleaners Different from the Other Vacuum Cleaners?

The problem with “suck and bag the dirt’ type of vacuum cleaners is that they just suck the air and collect it directly in the filter bag. This holds the dust and lets out the other air that might still contain minute dust particles. As the bag gets filled, the area for the air to pass decreases eventually, decreasing the efficiency of the vacuum cleaner. This type of vacuum cleaner needs repetitive change and cleaning of the filter bag. Emptying the bag again and again over a period of time is quite annoying and the dust would eventually escape from the bag. Cyclonic vacuum cleaners overcome all these disadvantages to provide us with a clean and dust-free house.

How Do Cyclonic Vacuum Cleaners Work?

If you have ever wondered how your cyclonic vacuum cleaner works, here’s a guide that explains this.

In cyclonic vacuum cleaners, the air enters through the brush bar that is present at the bottom of the appliance. The air enters the first section in a direction perpendicular to the cylindrical dust bag and it spins around the large plastic cone that points down into a bin called cyclone in the middle. The dust particles swirl and collect at the bottom of the vacuum cleaner, whereas the holes in the cyclone pull up the air. Partially clean air is passed through the second stage of the vacuum cleaner. The second stage focuses on removing the minute dirt particles that were not filtered in the previous stage. A similar procedure takes place in the second stage of vacuuming where smaller cyclones are used. Now, the first HEPA filter allows clean air to pass through. A major amount of dirt would have been filtered already. The HEPA filter does not stop the airflow through the machine. After passing through the 2nd HEPA filter, the air in the room becomes pure.

Cyclonic vacuum cleaners are an ideal option for daily cleaning routine at your home. You can use it to clean your bed, carpet, and hard floors using this type of vacuum cleaner. Its powerful working technology sucks all the dust and dirt to provide you with a clean house. Unlike traditional vacuum cleaners, these vacuum cleaners don’t let the dirt escape from the dirtbag, which pollutes the air. The suction of the device isn’t affected by the content of the dirtbag. Cyclonic vacuum cleaners are easy to use and work efficiently, making them the best vacuum cleaner in India.

Leave a Reply